SPORT + COMPETITION
- Primary and secondary sports
- Competition / governing-body requirement
- Court dimensions and run-off
- Permanent court markings and graphics
- Portable or fixed basketball equipment interfaces
← Timber Flooring Technical Centre
ATHREN Timber · Specifier Checklist
Resolve the hall interfaces before the sprung floor is frozen.
A practical coordination checklist for designers, venue teams and project managers specifying ATHREN timber sports flooring.
07specifier coordination groups
Pre-specification checklist
Coordinate more than the timber.
The floor is connected to the slab, equipment, thresholds, services, line plan and hall operating model. The checklist keeps those interfaces visible before quotation and installation planning.
SLAB + LEVEL
- Finished concrete datum
- 2 m straightedge / flatness survey
- Cracks, joints and local level changes
- Available total floor build-up
- Threshold and adjacent-finish levels
MOISTURE + ENVIRONMENT
- Current slab moisture information
- Building enclosed / conditioned status
- Expected operating temperature and humidity
- Perimeter wall conditions
- Any underfloor heating or unusual environmental exposure
SERVICES + EQUIPMENT
- Basketball backstop bases and floor interfaces
- Volleyball / badminton / other floor sockets
- Electrical and data penetrations
- Underfloor ducts or services
- Divider-curtain and equipment parking zones
FLOOR DETAIL
- Single- or double-batten pathway
- Final board specification and finish
- Perimeter expansion strategy
- Intermediate movement provisions
- Ventilation locations
- Line-marking and logo requirements
EVENT + OPERATIONS
- Temporary seating or staging
- Trolley / equipment movement
- Floor protection for non-sport use
- Cleaning and maintenance model
- Storage for protection materials
EVIDENCE + HANDOVER
- Current FIBA approval / official listing where required
- 2020 laboratory report retained as historical performance evidence
- Current production equivalence to the tested configuration
- Fire / VOC / EN 14904 documentation where required
- Installation instructions and tolerances
- Warranty and maintenance guide
- Final as-supplied configuration record
Current hold points
Do not close these from assumptions.
These items remain explicit hold points until current manufacturer or project evidence is available.
01
Current production equivalence to the 2020 tested single- and double-keel samples
02
Exact finished board thickness and the 20 mm / 22 mm notation
03
Double-keel current 19 mm subfloor source versus 18 mm in the 2020 test report
04
Current FIBA approval/listing, EN 14904, fire/VOC, warranty and maintenance evidence
Turn the checklist into project data
Complete the flooring brief next.
The project brief records the key selection inputs in one shareable summary for Apollo's technical and commercial review.
Direct project answers
What project teams need to know about this ATHREN timber-flooring pathway.
What is ATHREN Timber Flooring Specifier Checklist?
Pre-specification coordination checklist covering sport and competition requirements, slab and levels, moisture/environment, services and equipment…
What projects are suitable for athren timber flooring specifier checklist?
Typical project pathways include residential projects, commercial projects, hospitality projects, and international projects. Final suitability depends on the exact configuration, site conditions, operating requirements and destination.
What information is needed to specify athren timber flooring specifier checklist?
Before specification or quotation, the project review should confirm: Verified product specifications or documented product facts; Clear applications, limitations and configuration boundaries; Project inputs required for manual quotation or technical review; Apollo supply-only scope and purchaser/local-project responsibilities. Claims are kept tied to the exact proposed system rather than transferred from a related product or reference configuration.
Can Apollo NZ Global supply athren timber flooring specifier checklist internationally?
Apollo can supply suitable projects internationally where the product and destination pathway are current. Send the project location, intended use, dimensions or quantities, timing, relevant drawings or photographs, and any known performance, compliance or environmental requirements for review.