VÆRDR · Touring Shelter Systems
VÆRDR 270
270° adventure awning
A wraparound vehicle shelter designed around side-and-rear camp living for 4x4 touring, expedition vehicles and suitable camper setups.
Role in the range
Shelter chosen around the vehicle, not the other way around.
270 creates a broader protected working and living zone around the vehicle than a straight awning, making it the VÆRDR pathway for touring setups that use both the side and rear of the vehicle.
Product visual library
See the shelter before the specification.
VÆRDR uses clean public-facing imagery to explain the product family while supplier-branded development photography remains internal. Technical diagrams are indicative and are checked against the final quoted configuration.
Configuration pathway
Start with what the shelter needs to do.
Typical applications
Built for moving outdoor rooms.
Product evidence
Technical pathway for the quoted system.
Vehicle-mounted fan-shaped awning that unfolds around the side and rear of a compatible 4x4 or adventure vehicle.
Vehicle-side mounting pathway
Roof-rack / L-bracket mounting pathway
Support-pole and guy-line touring setup
12 V LED-strip pathway is source-documented for selected configurations
Source-listed nominal sizes: 2000, 2300, 2500, 2600 and 3000 mm
Source-listed net weight range: approximately 16.85–23.6 kg
Source footprint references include approximately 2300–2560 mm coverage dimensions on the supplied layout; exact geometry is configuration-dependent
Fan-shaped wraparound canopy
Four-support-pole configuration is source-listed
Ground stakes and wind ropes are included in the source packing pathway
Mounting brackets are selected around the vehicle / rack arrangement
Awning opens sequentially around the vehicle and is tensioned with support poles, tie-downs and ground stakes
Source installation documentation calls for professional installation and verification of suitable structural fixing points
Final wind-use, anchoring and weather limits are confirmed for the quoted system and installation
Published dimensions and features describe the current source-supported VÆRDR pathway. Exact production model, mounting hardware, electrical components, fabric, packed dimensions and operating limits are frozen only on the project quotation.
Before quotation
The vehicle is part of the specification.
VÆRDR is supplied as a fitment-led touring system. Final size, mounting brackets, fabric, controls, electrical items, accessories and operating limits are confirmed against the selected configuration and destination.
Vehicle and rack / canopy arrangement
Left- or right-side deployment requirement
Rear-door and tailgate use
Desired covered zone
Wall / room accessory requirement
Exposure and campsite operating conditions
Image note. VÆRDR public imagery combines approved product-family artwork, lifestyle renders and technical diagrams. It is used to explain the intended product family and configuration pathway rather than to certify an exact vehicle fitment. Supplier-branded development photography is retained internally. The quoted specification and approved production configuration control the final supply.
Side-mounted RV awning
Legless cassette awning
Roof-mounted camper awningWherever the vehicle stops, shelter begins.